Vivitar DVR 946HD User Manual page 7

Note:

After the camcorder is powered on, the SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.

Make sure the SD card is not locked (check the lock switch on the side of the SD card).
If the SD card is locked this will prevent the camcorder from saving captured photos to the
SD card.
3. Powering ON the Camcorder
Press the POWER
SETTING THE CAMCORDER LANGUAGE
1. You will first be prompted to select a language for the camcorder. The Language selection menu
will appear. Press the UP/DOWN button to select the language of your choice and press the SET
button to confirm the selection.
2. After selecting a language, you will be asked if you would like to continue with the initial
camcorder setup. A message will appear: "Continue with Camera Setup?"
Press the RIGHT/LEFT button to select "Yes" to continue or "No" to exit the setup, and then
3.
press the SET button to confirm your selection.
button to turn on the camcorder.
6