Vivitar DVR 946HD User Manual page 47

To Enable/Disable the Timestamp:
1. Press the MENU button to open the menus for the current mode.
Press the LEFT or RIGHT button to scroll and select the 'Date/Time' menu.
2.
3. Press the UP or DOWN button, or push the Zoom lever UP or DOWN, to highlight the desired
menu selection.
4. Press the SET button to confirm and select the highlighted menu option.
5. A selected option icon will appear on the selected item.
6. To continue within the menus:
Press the LEFT or RIGHT button to select the next menu item.
7. To exit the menu view:
Press the MODE button to exit the menu and return to your previous mode.
Note: This setting is saved by your camcorder until you manually change the setting or restore the
camcorder's default factory settings.
To Set the Date and Time:
1. Press the MENU button to open the menus for the current mode.
Press the LEFT or RIGHT button to scroll and select the 'Date/Time' menu.
2.
Press the UP or DOWN button, or push the Zoom lever UP or DOWN, to highlight the 'Date
3.
Setup' menu option, and then press the SET button to open the menu.
4. Scroll through the date and time menus with the RIGHT and LEFT buttons.
5. For each field in the menu, use the UP and DOWN buttons or push the Zoom lever UP or DOWN
to set the specific date and time.
6. When you have finished setting the date and time, press the SET button to save your settings
and return to the previous mode.
7. Press the MODE button to exit the date and time settings without saving your settings and return
to your previous menu screen.
46