Related Manuals for HireTech HT7-2
Summary of Contents for HireTech HT7-2
- Page 1 DISC FLOOR SANDER SANDING PAD FITTING & MAINTENANCE INSTRUCTIONS MODELS: HT7-2 JULY 2003 © HIRETECH PART No. 010655-0...
- Page 2 It is very important to maintain the HT7-2 Edger Reasons for Trimming the Sanding Pad sanding pad in perfect condition for score free As part of routine maintenance. sanding and to maximise the life of the abrasive disc. In normal operation the sanding pad needs little The sanding pad has been damaged.
- Page 3 DRUM ASSEMBLY To trim the sanding pad fix a piece of fine grit Adjusting the Castors floor sander abrasive (120 grit) face up to a solid The castors are set to achieve the correct contact area flat board that is large enough to stand on and across the sanding pad as illustrated in the diagrams operate the edger.
- Page 4 HIRETECH HT7-2 DISC FLOOR SANDER PARTS DRAWING DISC FLOOR SANDER DISC FLOOR SANDER DISC FLOOR SANDER DISC FLOOR SANDER MODEL HT7-2 MODEL HT7-2 MODEL HT7-2 MODEL HT7-2 From Serial Number From Serial Number 00446 - 110/120 Volt 00446 - 110/120 Volt (Excl.
Need help?
Do you have a question about the HT7-2 and is the answer not in the manual?
Questions and answers