Subscribe to Our Youtube Channel
Related Manuals for HireTech HT7
Summary of Contents for HireTech HT7
- Page 1 HT7 DISC FLOOR SANDER From Serial Number 00607 (240/240 Volt) & 00466 (110/120 Volt) OWNERS MANUAL & OPEARTING INSTRUCTIONS 2016/11 © Hiretech Part # 011680...
-
Page 2: Table Of Contents
WARNING: Risk of potential injury. Hiretech Limited Warranty. Hiretech reserves the right to make changes or improvements to it’s Moving Parts - to reduce the risk of injury, unplug the products without prior notice. -
Page 3: Specification
5. Always replace the dust bag (paper type) or empty the dust Ideal for confined areas such as closets and stair treads the HT7-2 bag (cloth type) when the dust in the bag reaches the ‘MAX’... -
Page 4: Preparation
OFF position. sanding disc. CAUTION - the HT7-2 Disc Floor Sander is a powerful CAUTION - never fit more than one abrasive disc . If more machine. Always ensure you have a firm grip before than one abrasive disc is fitted the setup of the sander will switching on. -
Page 5: Floor Sanding Technique
Overlap the one and HT7-2 Disc Floor Sander. Always try a medium grit paper first, third area by 0.6 to 0.9 meters (2 to 3 feet ) with the two thirds particularly on a diagonal cut. -
Page 7: Service & Routine Maintenance
The grease may also melt and leak from the gear box staining 2. The HT7-2 is subject to high speeds. All screws should be the floor or work piece being sanded. fitted using a suitable thread lock compound. - Page 8 It is very important to maintain the HT7-2 Edger sanding pad in perfect condition for score free sanding and to maximise the life of The correct contact area is illustrated in the diagram below.
-
Page 9: Fault Finding
WARNING: use toughened glass only with a minimum Electrical Testing thickness of 6mm (¼”) with rounded/polished edges. Take CAUTION: testing for electrical safety should only be care when handling glass. Always use suitable gloves, eye undertaken by a competent person and all results recorded. protection and protective clothing. -
Page 10: Parts Diagram
PARTS DIAGRAM HT7-2 Disc Floor Sander... -
Page 11: Parts List
010480 Frame Bag Support 010010 Screw 010490 Bag Dust Cloth 011600 Switch 220/240 Volt (Bias Off) 07038 Disposable Paper Dust Bag HT7/HTF 011610 Switch 110/120 Volt (Bias Off) Pack 2 010050 Cover Motor 07040 Disposable Paper Dust Bag HT7/HTF 010070...
Need help?
Do you have a question about the HT7 and is the answer not in the manual?
Questions and answers