Lane Departure Warning (Ldw Operation - Volvo S60 Owner's Manual

DRIVER SUPPORT
Lane Departure Warning (LDW) –
operation
Operation and function
LDW can be switched on or off by pressing the
button on the center console. A light in the but-
ton illuminates when the function is on. This is
supplemented by graphic displays in the instru-
ment panel, for example:
222
LDW displayed in the instrument panel
•
The LDW symbol has white side marker
lines: – the function is active and "sees" one
or both of the road's side marker lines.
•
The LDW symbol has gray side marker lines:
– the function is active but cannot "see" one
or both of the road's side marker lines.
or
•
The LDW symbol has gray side marker lines:
– the function is in standby mode because
the vehicle's speed is below 40 mph
(65 km/h).
•
The LDW symbol has no side marker lines: –
the function is deactivated.
WARNING
The driver will only be warned once for each
time the wheels cross a marker line. No alarm
will be given if a marker line is between the
wheels.
Settings
Settings for Lane Departure Warning can be
made in the menu system by pressing My Car.
Settings Car settings
Go to
support systems Lane Departure
There are two alternatives:
•
On at start-up
: This selection switches
LDW on each time the engine is started.
Otherwise, the system will be in the mode
that it was in when the engine was switched
off.
•
Increased sensitivity
: This selection increa-
ses the function's sensitivity. Warnings will be
given at an earlier stage and fewer limitations
apply. When this setting is being used, the
system only needs to monitor lane marker
lines on one side of the vehicle to change
Lane Depart Warn Available
status to
Related information
•
Driver Alert System (p. 215)
•
Lane Departure Warning (LDW) – symbols
and messages (p. 224)
Driver
Warning.
.