Table of Contents
Advertisement
DRIVER SUPPORT
||
Select from the options:
•
On at startup
- The function is set in
standby mode each time the engine is
started. Otherwise the same value as when
the engine was switched off is obtained.
•
Increased sensitivity
increases, an alarm is triggered earlier and
fewer limitations apply.
Related information
•
Lane Departure Warning (LDW)* (p. 251)
252
Lane Departure Warning (LDW) -
operation
Lane Departure Warning (Lane Departure
Warning) is complemented in the combined
instrument panel with intuitive graphics in differ-
ent situations. Here are some examples:
- The sensitivity
LDW function side lines.
•
The LDW symbol has WHITE side lines - the
function is active and detects/"sees" one
side line, or both.
•
The LDW symbol has GREY side lines - the
function is active but detects neither left nor
right side line.
or
•
The LDW symbol has GREY side lines - the
function is in standby mode because the
speed is below 65 km/h (40 mph).
•
The LDW symbol has no side lines - the
function is deactivated.
Related information
•
Lane Departure Warning (LDW)* (p. 251)
* Option/accessory, for more information, see Introduction.
Advertisement
Table of Contents
