Audio Settings - Panasonic CQ-RX101W Operating Instructions Manual

Audio Settings

[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to select)
selects items in the audio menu.
[DISP] (Display)
exits from the audio menu.
1
Press [VOL] (PUSH SEL) to open the audio menu.
Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment,
10 seconds in the SQ adjustment), the display returns to the regular mode.
2
Press [VOL] (PUSH SEL) to select a mode to
be adjusted.
(Setting Range: 0 to 40, Default: 18)
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)
(Tone/SQ adjustable range :
Setting range:
SQ Low/Bass:
SQ Mid:
SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
(Setting Range: 15 levels each, Default: CNT (center))
(Setting Range: 15 levels each, Default: CNT (center))
( Continued below)
Volume
Bass
Treble
SQ Adjustment
12 dB to 12 dB (by 2 dB))
±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
Balance
Fader
3
Turn [VOL] clockwise or counterclockwise to
adjust.
: Up
: Down
: Increased
: Decreased
: Increased
: Decreased
/ : center frequency up/down
[ ] [
]: Level up/down
[ ] [
: Right enhanced
: Left enhanced
: Front enhanced
: Rear enhanced
- 16 -
]: Band selection