WMA MP3 CD Player/Receiver CQ-RXBT490W Model: WMA MP3 Player/Receiver CR-LXBT490W Model: (CQ-RXBT490W) Operating Instructions TEXT (only for CQ-RXBT490W) ¡ Please read these instructions carefully before using this product and keep this manual for future reference.
If the product needs to be repaired, gasoline tank, and electric wiring are located. Then open consult your dealer or an authorized Panasonic Service the hole from outside if possible. Centre.
Page 3
For maximum safety, have it installed by your attention. dealer. Panasonic is not liable for any problems resulting Observe the following cautions when using from your own installation of the unit.
Safety Information (continued) Caution (only for CQ-RXBT490W) THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Before Reading These Instructions (continued) This operating instruction manual is for 2 models CQ-RXBT490W and CR-LXBT490W. The difference among these models’ are mentioned below. All screens and main body illustrations in this book represent CQ-RXBT490W unless otherwise specified. Differences Among 2 Models Models...
General ........9 (only for CQ-RXBT490W) ....35 Notes on MP3/WMA ......36 Audio Settings ......11 Radio (AM/FM) ......13 Troubleshooting ......38 Disc Player (only for CQ-RXBT490W) ..14 Maintenance/Fuse ......43 USB (MP3/WMA) ......17 Specifications ......44 For use with iPod ......21 Appendix ........45 Features...
0.5 seconds and release it.), skip to the previous/next track [{] [}] (FOLDER) (only for CQ-RXBT490W)/fi le in the player skips to the previous/next folder source. (For fast reverse/fast forward, hold in the player source.
¡ Selection of the 12-hour system displays “AM” dur- Minute blinks. ing AM hours and “PM” during PM hours. ¡ To exit from the clock display setting, press [DISP]. CQ-RXBT490W/CR-LXBT490W...
Source Selection Volume level (0 to 40) Press [SOURCE] to change the source. (default: 18) page 13) Radio Disc player (only for CQ-RXBT490W) page 14) page 17) The sound of connected audio device can be output from car speakers. CQ-RXBT490W/CR-LXBT490W...
Press [ ] (Return). Note: This history mode is Note: This “PHONE” selectable only when a device is mode is selectable paired and connected to this unit. only when switch to Bluetooth mode. ® Page 28 Page 25 Page 30 CQ-RXBT490W/CR-LXBT490W...
[6] for more than 2 seconds, and the setting value is written into the desired SQ. Note: Only SQ presetting value cannot be saved in [1] button. Balance (Setting Range: 15 levels each, Default: CNT (centre)) q / w : Adjustment CQ-RXBT490W/CR-LXBT490W...
Page 12
Wide-ranged and deep sound: [1] to [6]. slightly emphasizes bass and treble. ¡To return an adjusted SQ to the default setting, select the SQ which to be returned to the default setting, then hold down [BAND] for more than 2 VOCAL seconds. CQ-RXBT490W/CR-LXBT490W...
Hold down one of the preset buttons from [1] through [6] for more than 2 seconds. Band (blinks once) Frequency Preset Number Display Change Note: New stations overwrite existing saved stations. Press [DISP] to change the display. Radio mode display (Frequency) Clock display CQ-RXBT490W/CR-LXBT490W...
Disc Player (only for CQ-RXBT490W) Caution ¡ A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally. ¡ Do not insert a disc when the indicator lights. page 35) and “Notes on MP3/WMA”...
Page 15
11 or less, the characters do not scroll. Disc title ¡ “NO TEXT” is displayed when no information exists on the disc. ¡ ID3/WMA tag information is displayed for the album name and title/artist name. Track title Clock time (Return to “Track/Play time”) CQ-RXBT490W/CR-LXBT490W...
Page 16
Disc Player (continued) (only for CQ-RXBT490W) Random Play Setting Press [5] (RANDOM) to select the random play setting. Random play All the available songs (tracks/files) are played in a random sequence. ( lights.) Folder random play (only for MP3/WMA) All the available files in the current folder are played in a random sequence.
Press [BAND] ( 5 /h). sible on this product, because some USB devices are not compliant with the USB standard. Press again to cancel. ¡ Even with a USB device in the Mass Storage Class, playback may not be possible in some cases. CQ-RXBT490W/CR-LXBT490W...
Page 18
1st fi le or 1st folder respectively within same hierar- chy. Root Folder (Root Directory) : Folder : File (to 1 level higher hierarchy) (to 1 level lower hierarchy) (move in the same hierarchy) (selected file is played) CQ-RXBT490W/CR-LXBT490W...
Page 19
[3] (SCROLL). If the number of displayed characters is 11 or less, the characters do not scroll. ¡ “NO TEXT” is displayed when no information exists on the USB device. ¡ ID3/WMA tag information is displayed for the album name and title/artist name. CQ-RXBT490W/CR-LXBT490W...
Page 20
Return to regular play. Repeat Play Setting Press [6] (REPEAT) to select the repeat play setting. Repeat play The current file is repeated. ( lights.) Folder repeat play The current folder is repeated. ( lights.) Repeat off Return to regular play. CQ-RXBT490W/CR-LXBT490W...
If such phenomenon occurs, please select the desired fi le from your iPod directly. ¡Playing Mode Selection is not available when this unit is switch to iPod control mode. CQ-RXBT490W/CR-LXBT490W...
Page 22
USB source is selected. blinks.) Display Change Repeat play off Press [DISP]. Return to regular play. Current fi le/all fi les Note: Depending on the connected iPod/iPhone, (Default) repeat play or random play may differ from this unit and your iPod/iPhone. CQ-RXBT490W/CR-LXBT490W...
Page 23
¡ iPhone 3GS/ver. 5.0.1 ¡ iPhone 3G/ver. 4.2.1 ¡ iPhone/ver. 3.1.3 * Operation check has been completed with soft- ware available at the end of December, 2011. We do not guarantee the operation with our future products or upgraded software. CQ-RXBT490W/CR-LXBT490W...
Press [VOL] (PUSH SEL). Input the PIN code for connection. (The default PIN code is “0000”). “PAIRED” is displayed on this unit and then the device is connected to this unit. Operate the Bluetooth device to pair it with this ® unit. CQ-RXBT490W/CR-LXBT490W...
® Turn [VOL] : Selects number 0 to 9. unit. Push [VOL] : Selects next digit to be entered. When last digit is entered and confirmed, the new PIN code is registered. Completed CQ-RXBT490W/CR-LXBT490W...
Press [VOL] (PUSH SEL). Press [VOL] (PUSH SEL). when “CONNECTING” is displayed, please make sure your Bluetooth device is standby for connection. ® The paired device is disconnected from this unit. The paired device is connected to this unit automatically. CQ-RXBT490W/CR-LXBT490W...
Hold down [1] or [2] for more than 2 sec- onds. Turn [VOL] to select “DEL PAIR”. Press [VOL] (PUSH SEL). Press [VOL] (PUSH SEL) to delete. The paired device is deleted. Display Change Press [DISP] to change the display. Bluetooth display ® Clock display. CQ-RXBT490W/CR-LXBT490W...
Press [VOL] (PUSH SEL), and then turn [VOL] to select set ON or OFF Automatic answer- ing deactivated (Default) Automatic answering activated Note: Once rotary operation is made, the setting is activated. When automatic answer is set to ON, this unit answers an incoming call automatically. CQ-RXBT490W/CR-LXBT490W...
Page 29
“PHONE ”. You can make a call from the received call his- tory: Press [VOL] (PUSH SEL). Turn [VOL] to select displayed number or name and then press [PHONE] or [VOL], the displayed number or name is called. CQ-RXBT490W/CR-LXBT490W...
Page 30
Press [VOL] (PUSH SEL) and then turn [VOL] to select the delete mode as below: Delete with all his- Press [VOL] (PUSH SEL). tory record Example Delete with missed The device information of this unit is displayed. call record CQ-RXBT490W/CR-LXBT490W...
Page 31
Press [VOL] (PUSH SEL) switch to waiting status does not exist, “NO DATA” is displayed and returns to for importing phonebook from Bluetooth mobile previous screen. ® phone. Note: Bluetooth may disconnect temporarily from ® your device and will reconnect automatically. “WAITING” blinks. CQ-RXBT490W/CR-LXBT490W...
Back to the previous fi le. (press twice) Notes: The control of pressing [d]/[s] in music mode ¡ depends on the key defi nitions of connected device. Depending on the specifi cations of the connected ¡ audio device, operations may not work. CQ-RXBT490W/CR-LXBT490W...
Bluetooth SIG, Inc. and any use of such marks operation may differ because of the specifications or by Panasonic Corporation is under license. Other settings of the device. trademarks and trade name are those of their ¡...
Press [VOL] (PUSH SEL), and turn [VOL] clockwise or counterclockwise to select. ALARM OFF (default) ALARM ON Note: Once rotary operation is made, the setting is activated. CQ-RXBT490W/CR-LXBT490W...
Notes on Discs (only for CQ-RXBT490W) How to hold the disc Disc insert ¡ Do not touch the underside of the disc. The surfaces of new discs tend to be slippery. There- ¡ Do not scratch the disc. fore, when using such a disc for the first time, it may ¡...
A to Z, digits 0 to 9, and the following symbols: Album name, (space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ CQ-RXBT490W) _ ` { | } ~ Title name/artist name Disc title ¡...
Page 37
Recording MP3/WMA Files on a CD-Media (only for CQ-RXBT490W)/USB-Device Compressed audio file writing ¡ “ROOT” appears when displaying the root folder name. ¡ Do not save an audio file (CD-DA file) and a ¡ Empty folders stored on the USB memory are not compressed audio file on the same disc.
¡ Start the engine. (Alternatively, turn the ignition switch to the ACC position.) ¡ Verify the wiring. (Battery lead, power lead, ground lead, etc.) ¡ Fuse blown (Consult your dealer or an authorized Panasonic Service Centre.) ¡ Ask a professional for fuse replacement.
Page 39
Some mobile phones can not play music via Bluetooth if mobile ® phone is not in the music player mode. ¡ Operate mobile phone, select the music player mode, then press PLAY to play the desired music file via Bluetooth communica- ® tion. CQ-RXBT490W/CR-LXBT490W...
Page 40
¡ Confirm the directory information is completely and correctly. The mobile phone is too far apart or communication interference occurs. ¡ Bring the mobile phone closer to this unit or switch off the other wireless device and keep it away from this unit. CQ-RXBT490W/CR-LXBT490W...
Page 41
¡ Switch the power on or set ACC to ON. If this does not solve the problem, un- plug the power cord and plug it in again (a Installation Instructions). In case the unit is still out of order, consult your dealer or an authorized Panasonic Service Centre.
Page 42
Pairing with the Bluetooth device fails for some reason. ® ¡ Check to see whether the Bluetooth device operates properly. ® Connection with the Bluetooth device fails for some reason. ® ¡ Check to see whether the Bluetooth device operates properly. ® CQ-RXBT490W/CR-LXBT490W...
Pesticide or damage to the unit. If the replaced fuse fails, Pesticide consult your dealer or an authorized Panasonic Service Centre. Thinner Thinner Benzine...
Appendix CQ-RXBT490W/CR-LXBT490W Bluetooth Device Compatibility List ® Remark in list: Hands- AVRCP A2DP Phone Brand Model Free (Con- (Sink) Book ○ Supported. (Unit) troller) ○ ○ ○ Apple iPhone NOT Supported by Bluetooth device. ® iPhone 3G ○ ○ ○...