TEFAL IH2018 User Manual page 15

Useful Hints and Maintenance of
Common Malfunctions
Common Malfunction
There is no beep when the
cooker is plugged in, or no
reaction or display when
pressing the power button.
Cooker turns off after
warning with continuous
beeps.
The cooker stops heating
during use
Please Note: If the power cord is damaged do not use the appliance. Have
it replaced by a Tefal Approved Service Centre to avoid any danger.
Malfunction Check
• Check if plug is damaged
• Check if power is cut off
• Check if the pot is induction compatible
• Check if pot is placed in the centre of the
ceramic plate
• Check if the pot base diameter is more
than 12cm.
• Check if the room temperature is too high;
• Check if air entry/ air exit is blocked ;
• For boil and milk modes, the hob stops
automatically when it reaches maximum
temperature.
• For fry modes, the hob stops at the end of
the preset time.
• Check if the appliance has been stopped
by a safety device. In this case, wait for
several minutes to confirm.
EN EN
15