Turning On The Appliance; Unloading The Dishwasher - Baumatic BAD4504 Instruction Manual

45 cm built-in dishwasher
Table of Contents

Advertisement

1
Draw out the lower and up per b asket, load the dishes and push them back.
It is commended to lo ad the lower bask et first, then the upper one (s ee the sectio n entitled
"
Loading the Dishwasher ).
2
Pour in the detergent (see the section e ntitled Salt, Detergent and Rinse Aid ).
3
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of th e
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4
Press the ON/OFF button, and the ON/OFF light will turn on. Press the program b utton to select
a desired wash cycle.
Premise
1
A cycle that is un derway ca n on ly be modified if it has only been running fo r a short
time. Otherwise, the d etergent may have already b een released, and the appliance may
have alread y drained the wash water. If this is the case, the detergen t dispenser must
be refilled (see the section entitled " Loading the Detergent " ).
2
Open the door a little to sto p the washing. Pre ss the programme button or the washing progra m more than 3
se cond s to c ancel the runn ing programme. Then you ca n select other programmes (see the section entitled "
Starting a wash cycle. . . " ).
3
When you select Intensive/Normal/Eco.Programmes, you can select the All in1 func tion.
If you open the door
the machine will
A forgotten dish can be added any time before the detergent cup opens.
1
Open the door a little to stop the washing.
2
After the spray arms stop working, you can open the door
completely.
3
Add forgotten dishes.
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.

Unloading the dishwasher

It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
"
Close the door,a
fter 10 seconds, the machine will work.
during a wash cycle
continue
working after 10 seconds.
It is dangerous to open the door when washing, because the hot water may scald you.
"
, the machine will pause. When you close the door ,
4
Close the door
5
The dishwasher will run after 10 seconds.
10
"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents