Moving The Appliance; Installation Preparation - Baumatic BAD4504 Instruction Manual

After Every Wash
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
Remove the Plug
Befo re cleaning or performing ma intenance, always
remove the p lug from the socket.
No Solvents or Abrasive Cleaning
To clean the exte rior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, or a cleaning product made s pecifically for
dishwashers.
Th e installation of the pipes
and electrical equipments
should be done by professionals.
●

Installation preparation

The installation position of dishwasher should be near the existing inlet and drain ho ses and
power cord.
One side of the cabinet sink s hould be chosen to facilitate the connection o f drain ho ses of
the dishwasher.
Note : please che ck the accompanying installation accessories(hook for aesthetic panel,screw)
When not in Use for a LongTime
It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
sea ls to last longer and prevent odours from forming
within the appliance.

Moving the Appliance

If the applian ce must be moved, try to keep it in the
vertical position. If a bsolutely ne cessary, it ca n be
positioned on its back.
Seals
One of the factors that cause odours to form in the
dishwasher is food th at remains trapped in the seals.
Periodic cle aning with a damp sponge will prevent this
from occurring.
Electrical Shock Hazard
Disconnect electrical power
before
installing dishwasher.
Failure to do so can result in
death or electrical shock.
13