Baumatic BAD4504 Instruction Manual page 7

45 cm built-in dishwasher
Table of Contents

Advertisement

Before using your dishwasher for the first time:
A.
Fill the rinse a id dispenser
B.
Fill in dete rgent
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on yo ur dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the d ishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Function of Rinse Aid
Rinse aid is automatically added during the las t rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-aid by the color of the
op tica l level
indicator "C" located next to the cap. When the rinse-aid container is full, th e whole indicator will be dark .As the
rin se-aid
diminishes, the size of the dark dot decre ases . You sh ould never let the rinse aid get below 1 / 4 full.
As the rinse aid diminishes, the size of the black dot
on the rinse aid lev el indicator changes, as illustrated be low.
Fu ll
3 / 4 fu ll
1 / 2 fu ll
1 / 4 fu ll - Should refill to eliminate spotting
Empty
RINSE AID DISPENSER
1
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2
Pour the rinse aid into the dispenser, being careful not to overfill.
3
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spills
with a damp cloth. Don't forget to replace the cap before you close dishwasher door.
Attention!
Clean up any rinse aid split during filling with an absorbent cloth to avoid excess foaming
during the next wash.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents