Page 1
MA2 - Window Alarm Installation and Operating Instructions These instructions should be retained in a safe place for future reference. Kit Contents: 1 x Alarm Unit 4 x 1.5V A76 (LR44) Button Cells Siren (supplied fitted) Battery Status 1 x Adhesive Pad...
Page 2
INSTALLATION This alarm is suitable for mounting Note: Setting the alarm to Low in dry interior locations only. sensitivity will require a greater amount of vibration to trigger the 1) Fix the alarm in position on alarm but will make it less prone to the window glass using the false alarms.
Page 3
To test the battery remove the not allow water to enter or battery cover and press the attempt to clean inside the unit. battery test button, if the battery Batteries: status indicator LED does not illuminate or is dim then the Do not allow batteries to corrode battery should be replaced.
Page 4
Proof of purchase. A full description of the fault. All relevant batteries (disconnected). In the second year it should be returned direct to Friedland Technical Sales Services Department at the address shown below. Friedland is a trademark of Novar ED&S.
Need help?
Do you have a question about the MA2 and is the answer not in the manual?
Questions and answers