Advertisement
Quick Links
MA10 - Door Stop Alarm
Installation and Operating Instructions
These instructions should be retained in a safe place for future reference.
Kit Contents:
1 x Door Stop Alarm Unit
1 x Instruction Leaflet
Tools and Equipment Required:
No.0 Philips Screwdriver
1 x 9V PP3 ( 6LR61) Alkaline
Battery
INTRODUCTION
The Door Stop Alarm is a battery
powered portable door alarm,
opening the door and pressing the
pressure plate operates the alarm.
Safety: The use of ear protection
is advisable when working in close
proximity to the Siren due to the
high sound level produced.
OPERATION
This alarm is suitable for use in dry
interior locations only.
Always ensure that batteries are
fitted and in good condition.
Switch the alarm ON and place
behind the door in the direction that
the door opens with the wedge
facing towards the door. The anti-
Pressure
Plate
Low Battery
Indicator
Siren
ON/OFF
Switch
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for FRIEDLAND MA10
Summary of Contents for FRIEDLAND MA10
- Page 1 MA10 - Door Stop Alarm Installation and Operating Instructions These instructions should be retained in a safe place for future reference. Kit Contents: Safety: The use of ear protection is advisable when working in close 1 x Door Stop Alarm Unit...
- Page 2 slip pads on the base of the alarm Low Battery Low Battery LED must be in contact with the floor. Warning: illuminates When the door is opened and the Replacement 1 x 9V PP3 (6LR61) wedge pressed the siren will Battery: Alkaline Battery activate.
- Page 3 Proof of purchase. A full description of the fault. All relevant batteries (disconnected). In the second year it should be returned direct to Friedland Technical Sales Services Department at the address shown below. Friedland is a trademark of Novar ED&S.
Need help?
Do you have a question about the MA10 and is the answer not in the manual?
Questions and answers