Samsung AR10FVSED Series User & Installation Manual page 26

PROBLEM
adjustment is not
working.
Fan speed
adjustment is not
working.
Remote
controller is not
working.
Timer function
does not set.
The indicator
is blinking
continuously.
Odors permeate
in the room
during operation.
26
Crystal EU_AR09FSSE@_IB_DB68-03364A_EN.indd 27
SOLUTION
• Check if you have selected
In these desired temperature is set to auto
• Check if you have selected Auto/Dry/Turbo/
mode. In these mode, fan speed is set to Auto
and you cannot adjust the fan speed.
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller
sensor.
• Check that there are strong lighting apparatus near the air
bulbs or neon signs may interrupt the electric waves.
• Check if you press the Set/Cancel button on the remote
controller after you have set the time.
• Press the Power
If the indicator is still blinking, contact the service center.
• Check if the appliance is running in a smoky area. Ventilate
the room or operate the air conditioner in Fan mode for
1~2 hours. (We do not use smelly components in the air
conditioner.)
Auto/Dry/
the temperature
button or disconnect the power plug/
mode.
2012-11-1 14:31:01