Creating A Route - Garmin etrex Quick Start Manual

1. Select Where To?.
2. Select All PoIs.
3. Enter the name or part of the name.
4. Select Done.

Creating a route

A route is a sequence of waypoints that
leads you to your final destination.
1. Select Route Planner > Create
Route > Select First Point.
2. Select a category.
3. Select the first point in the route.
4. Select Use.
5. Repeat steps 2–4 until the route is
complete.
6. Select back to save the route.
Tracks
A track is a recording of your path.
The track log contains information
about points along the recorded path,
including time, location, and elevation
for each point.
recording Track Logs
1. Select Setup > Tracks > Track
Log.
2. Select Record, Do Not Show or
Record, Show on Map.
If you select Record, Show on
Map, a line on the map indicates
your track.
3. Select Record Method.
4. Select an option:
• To record tracks at a variable
rate that creates an optimum
representation of your tracks,
select Auto.
• To record tracks at a specified
distance, select Distance.
• To record tracks at a specified
time, select Time.
5. Select Recording Interval.