Advertisement
Supported signals
Supported signals for SDI/DIGITAL1
Resolution (H x V)
720 x 480i
720 x 576i
1280 x 720p
1920 x 1080i
1920 x 1080sf
1920 x 1080p
Only support 3G-SDI Level-A signal.
NOTE • Be sure to check jack type, signal level, timing and resolution before connecting
this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes is not
possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases. Refer to the
number of display pixels above.
• The signal is converted to the projector's panel resolution before being displayed. The best
display performance is achieved if the resolutions of the input signal and projector panel are
identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite sync or a
sync on G.
• The illustrations in this manual are for illustrative purposes. They may differ slightly from
your projector.
6
Signal mode
480i
576i
720p (50Hz)
720p (60Hz)
1080i (50Hz)
1080i (60Hz)
1080i (25Hz)
1080i (30Hz)
1080p (50Hz)
1080p (60Hz)
H. frequency
V. frequency
(kHz)
15.7
15.6
37.5
45
28.1
33.8
28.1
33.8
56.3
67.5
Rating
(Hz)
60
SMPTE
50
SMPTE
50
SMPTE
60
SMPTE
50
SMPTE
60
SMPTE
50
SMPTE
60
SMPTE
50
SMPTE
60
SMPTE
Advertisement
