Advertisement
Network Bridge Communication
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by wired or wireless LAN
communication, an external device that is connected with this projector by RS-
232C communication can be controlled from the computer as a network terminal.
For details, see the 7. Network Bridge function in the Network Guide.
NOTE • If data is transferred using wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
If you use wired LAN, connect the computer's LAN port and the projector's
1.
LAN port with a LAN cable. Use the cable that fulfills the specification shown
in figure. If you use wireless LAN, insert the USB wireless adapter into the
projector's WIRELESS port.
Connect the projector's CONTROL port and the RS-232C port of the devices
2.
that you want to control with a RS-232C cable.
Turn the computer on, and turn the projector on after the computer has
3.
started up.
Set the COMMUNICATION TYPE to NETWORK BRIDGE in the
4.
COMMUNICATION menu of the OPTION - SERVICE menu.
LAN port
・LAN cable (CAT-5e or greater)
- CAT-5e or greater
- shielded type (connectors included)
- straight cable
- single cable
Network Bridge Communication
USB wireless adapter
WIRELESS port
LAN port
RS-232C cable
(cross)
RS-232C
19
Advertisement
