Installation
Warnings
Before installation read the instructions.
Contact the technical helpline (0845 0694 253)
if you are unsure.
• All electrical and mechanical components
(control unit, pump and flow sensors) must be
accessible after installation.
• The maximum flow rate the pump is designed
to work with is 20 ltrs/min.
• Do not plumb the pump outlet into the waste
piping that other appliances drain into as there
is a risk of induced syphoning. Use an
antisyphon trap where necessary.
• The shower floor must have a fall to the gulley.
• Plumbing installation must comply to latest
WRAS regulations.
• The electrical wiring must conform to EU wiring
regulations BS7671:2001 Amdt2: 2004.
User Warning
It is advisable where the property is unattended for
an extended period that the water supply to the
shower is shut off.
If there is a reduction in pump performance after
installation please contact your installer.
Contents
Illustrations
1.9 Control Unit
1.13 Auxilary Connections to Control Unit 12
3
4
5
7
8
8
9
10
11
13
13
15
16
18
19
20
21
23
4
4
4
5
5
6
7
8
8
8
9
10
12
13
16