Announcing A Call Transfer; Using Blind Call Transfer; Call Forward - LG-Nortel IP8840 User Manual

Press the Hold button or the
o
tone. You may then select another line to answer or place a call. Note, if you select an idle line and
take no action for about 15 seconds, the line is disconnected.
To retrieve a held call on a different line:
Press the slow flashing line button.
o
Select the desired call from the displayed call list using
o
OK
Select the softkey to resume a connection with the call.
o
To toggle between two calls on the same line:
Press the Hold button or the
o
call connects.

3.4. Announcing a Call Transfer

Using Announcing a Call Transfer, you send an active call to another extension after announcing the call
transfer to the receiving party.
To transfer an active call:
Press the Transfer button or the
o
receive dial tone.
Dial the number you wish to receive the transfer.
o
Await answer and announce the transfer.
o
To complete the transfer, hang up the handset.
o
To cancel a transfer, for example the second party does not answer or is busy:
EndCall
Press the
o

3.5. Using Blind Call Transfer

You can transfer an active call to another extension without talking to the party receiving the call. The call
transfers to the new party without verifying that the new party is there or willing to receive the call.
To transfer an active call without announcing the transfer:
BlindXfr
Press the
o
Dial the number you wish to receive the transfer.
o
To complete the transfer, hang up the handset.
o
To cancel a transfer, for example you mis-dial the receiving number:
EndCall
Press the
o

3.6. Call Forward

Call forward directs incoming calls to ring at another location that you designate. You can select one of
four (4) conditions that will forward your calls:
Call Forward Busy – redirects incoming calls if the line is busy.
-
Hold
softkey. The call status changes to hold and you receive dial
Resume
softkey, the active call status changes to hold and the held
Transfer
softkey.
softkey. The active call status changes to hold and you receive dial tone.
softkey.
5
IP8840 Broadworks IP Phone
Previous-Next
softkey. The active call status changes to hold and you
User Guide
softkeys
Dec. '08