LG-Nortel IP8800 Series Quick Installation Manual

IP8800 Series Quick Installation Guide
This document provides information about the IP8820, IP8830, and IP8840. You can download all required docu-
ments at www.lg-nortel.com.
Before you start
If you require a Global Power Supply for your IP Phone, use the LG-Nortel approved global power supply.
Package contents
The following items are included in your IP8800 Series package. Before installation, ensure that you have the
following package contents:
• IP Phone (IP8820)
• Handset Cord
Installation
To install this IP Phone correctly, please follow the procedures. Please refer to the figures as shown below.
Attaching the foot stand
Decide if you will be attaching the foot stand angle either 35 degree or 55 degree.
IP8800 Series Quick Installation Guide
• Foot Stand
• 2.0m CAT5 Ethernet Cable
Align the top tabs on the
foot stand with the slots on
the back of your IP Phone.
Please refer to the figures
left for the correct place-
ment of the foot stand.
And then, move the foot
stand upward until it clicks
into place.
The IP Phone sits at a 35
degree angle.
• Handset
• Number Plates (2ea)
(only for IP8820/IP8830)
Top Tabs
Turn the foot stand upside
down; Align the top tabs
on the foot stand with the
slots on the back of your IP
Phone. Please refer to the
figures left for the correct
placement of the foot stand.
And then, move the foot
stand upward until it clicks
into place.
The IP Phone sits at a 55
degree angle.