Table of Contents
Advertisement
5.8. Enabling Speed Number Dialing
The IP8840 Phone includes a Phone Book that supports up to 100 entries. Each Phone Book record
includes a two-digit Speed number, see
number (00~99) sends the contact number or user id from the associated Phone Book record.
To enable/disable Speed number operation:
Press the Setting (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 9, or move cursor to
o
softkey.
Yes
Press the
softkey to enable Speed number, or press
o
No
the
softkey to disable Speed number.
Move to another parameter with the navigation buttons and
o
continue the session or press the Setting (
exit the configuration session.
5.9. Key Tone
When you press a button on the IP8840 phone, the phone will generate a beep tone to indicate that the
button has been pressed. This key tone is optional and can be enabled or disabled using the key tone
setting.
To enable/disable the Key Tone:
Press the Settings (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 10, or move the cursor to
o
softkey.
Yes
Press the
softkey to enable the Key Tone, or press the
o
No
softkey to disable the Key Tone.
Move to another parameter with the navigation buttons and
o
continue the session or press the Settings (
exit the configuration session.
5.10. Bluetooth Headset
Your IP8840 phone can be equipped with an optional Bluetooth module; you can use a Bluetooth headset
with your phone. The
for installing the module are provided with the module or can be found in the IP8800 Installer Guide.
When paired and connected to a compatible Bluetooth headset, such as the IP-8502, the headset can
control the On/Off hook status of the phone and audio is delivered from the IP8840 to the headset using
wireless Bluetooth technology. In order to use a Bluetooth headset, the headset must be paired with and
activated in the IP8840. The following sections provide instructions for setting up your IP Phone for use
Speed Number
) button.
3.Phone Settings
9.Speed Number
) button. .
3.Phone Settings
10.Key Tone
icon appears in the upper line of the LCD if the module is installed. Instructions
22
IP8840 Broadworks IP Phone
Dialing. When enabled, dialing the Speed
Previous-Next
using the
Previous-Next
using the
Speed Number
Current value is 'Yes'.
) button to
Previous-Next
using the
Previous-Next
using the
Key Tone
Current value is 'Yes'.
) button to
User Guide
softkeys and press the
softkeys and press the
Yes
softkeys and press the
softkeys and press the
Yes
OK
08:30
No
OK
08:30
No
Dec. '08
Hide quick links:
Advertisement
Table of Contents
