Call Forward; 3-Party Conference; Call Waiting-Multiple Call Appearance - LG-Nortel LIP-6830 User Manual

Sip (session initiation protocol)
Table of Contents

Advertisement

LIP-6830
To transfer an active call:
1) Press
Softkey.
[BXfr]
2) Dial the number you wish to transfer.
3) Hang up to complete the transfer.
2.6

Call Forward

Call forward directs incoming calls to ring at another location. There are 4 conditions that can
be defined to forward calls;
-
Call Forward Busy — redirects incoming calls if the Line is busy.
-
Call Forward No Answer — redirects incoming calls if the call is not answered in the
designated time allowed (No Answer time).
-
Call Forward Busy or No Answer — redirects incoming call if the Line is busy or, if idle
after No Answer time expires.
-
Call Forward All Calls — redirects all incoming calls to a Line you designate.
To set up Call Forward:
1) Press
Softkey, and use the
[CFwd]
Forward Condition and press the
2) Input the telephone number or address where your calls will be sent and press the
Softkey.
NOTE: When Call Forward is active, "Fwd. to ......." shows on the LCD screen.
To disable Call Forward:
1) Press
Softkey, the message "Fwd. to ......." is no longer displayed on the LCD
[CFwd]
screen.
2.7

3-Party Conference

The LIP-6830 3-Party Conference feature lets you speak with two other parties at once.
To initiate a conference between the current party, you, and another party:
1) Press
or
[Conf]
2) When the party answers, press
NOTE: If the new party does not answer, press the
If the originator of the conference call hangs up, then the other two parties will be disconnected.
If either of the called parties hangs up, the call will remain connected.
2.8

Call Waiting-Multiple Call Appearance

Each Line configured on the LIP-6830 can have multiple call appearances; call activity appears
at more than one Line button to facilitate call handling. This is very useful if the user is on one
call and needs to act on another incoming call on the same Line. While on a call, you will
[Prev]-[Next]
Softkey.
[ OK ]
Softkey, and dial the number you want to join in the conference.
or
[Join]
7
Softkeys to select the desired Call
Softkey to establish the conference.
Softkey to return to the original party.
[EndC]
User Guide
[ OK ]
June 07

Advertisement

Table of Contents
loading

Table of Contents