Care Instructions - CONCORD TRANSFORMER T User Manual

_ CARE INSTRUCTIONS

The cover can be removed for washing.
To do so, move the head section (01) to its highest
position. To remove, pull the cover away from its
anchoring points. Begin by removing the head section
(01) followed by the seat section and the shoulder
shields (02).
Remove the styrofoam parts from
the covers in the shoulder area (02)
before washing.
• When they come into contact with moisture, especially
during washing, the cover fabrics may fade slightly.
• Do not use solvents!
42
To replace, start with the cover for the seat section. Firstly, pull the cover over the
cover panel on the backrest, and then, from the front, pull it over the armrests and seat
section.
Secure the cover using all of the fastening points.
Attach the cover for the head section (01).
Place the matching styrofoam parts into the
marked pocket on the inside of the covers
for the shoulder area (02). Now pull the
covers over the protectors for the shoulder
area (02).
The covers and styrofoam parts must not
be reversed!
43