Table of Contents
Advertisement
Speaker
Stand
4
Secure the speaker to the stand.
Speaker
Stand
5
Connect the speaker cable.
Press the speaker cable
into the groove.
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes
to match the walls or pillars to which they are
going to be fastened.
≥ Consult a qualified housing contractor concerning
the appropriate procedure when attaching to a
concrete wall or a surface that may not have
strong enough support. Improper attachment may
result in damage to the wall or speakers.
Cover plate
Remove before attaching the
speaker and keep for wall-
mount use (➜ page 38).
Screw
Tighten securely.
Ensure the speaker cable is
centered in the groove.
Insert the wire fully.
_
: White
`
: Blue
Push!
Assembled!
String (not included)
Thread from the wall to the
speaker and tie tightly.
Rear of the
Screw eye
speaker
(not included)
Wall
Approx. 150 mm
7
Hide quick links:
Advertisement
Table of Contents
