Using The Radio; Presetting Stations Automatically; Selecting The Preset Channels; Manual Tuning - Panasonic SC-HT540 Operating Instructions Manual

Using the radio

Numbered
buttons
FUNCTIONS

Presetting stations automatically

M
ain unit only
Up to 15 stations can be set in each band, FM and AM.
1
Press [SELECTOR] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "MANUAL".
Each time you press the button:
MANUAL()PRESET
Press [X TUNING W] to tune to the lowest
3
frequency (FM: 87.50, AM: 522).
4
Press and hold [MEMORY].
Release the button when "FM AUTO" or "AM AUTO"
is displayed.
The tuner presets all the stations it can receive into
the channels in ascending order.
≥ "SET OK" is displayed when the stations are set,
and the radio tunes to the last preset station.
≥ "ERROR" is displayed when automatic presetting is
unsuccessful. Preset the channels manually
(➜ right).
32
TUNER/BAND
ENTER
The illustration shows SC-HT540.
MEMORY
-TUNE MODE / -FM MODE
SELECTOR

Selecting the preset channels

1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press the numbered buttons to select the
channel.
≥ To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X, W].
When a stereo FM broadcast is being
received, "ST" lights in the display.
∫ If noise is excessive
When "FM" is selected
Press and hold [—FM MODE] on the main
unit to display "MONO".
Press and hold [—FM MODE] again to cancel the
mode.
TUNING
≥ The mode is also canceled when you change the
frequency.
When "AM" is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2()BP 1

Manual tuning

M
ain unit only
1
Press [SELECTOR] to select "FM" or "AM".
2
Press [-TUNE MODE] to select "MANUAL".
Press [X TUNING W] to select the frequency.
3
≥ To start automatic tuning, press and hold
[X TUNING W] until the frequency starts scrolling.
Tuning stops when a station is found.
∫ Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
1 While listening to the radio broadcast
Press [ENTER].
2 While the frequency and "PGM" are flashing on
the display
Press the numbered buttons to select a
channel.
≥ To select a 2-digit number
e.g. To select 12:
Alternatively, press [X, W], and then press
[ENTER].
The station occupying a channel is erased if another
station is preset to that channel.
PRG DISC SFC TG
DE
S
A AC
DISC SFC TG
[S10] ➜ [1] ➜ [2]
D.MIX MONO SLP
ST SRD E.
HDCD
H.BASS
PGM
W
1
MONO ST SRD E.
HDCD
H.BASS
PGM
W
1
D.MIX MONO SLP