Panasonic SC-HT540 Operating Instructions Manual page 39

Reattaching the speaker cable to the stand
1 Remove the eight screws from the stand, and remove the speaker net.
2 Position the cable.
Approx. 15 cm
3 Attach the speaker net with the screws.
∫ Fitting speaker stands
[Except front speakers ([HT540] [HT990]) and surround speakers ([HT990])]
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥ The stands must be able to support over 10 kg.
≥ The stands must be stable even if the speakers are in a high position.
e.g. Center speaker
Metal screw holes
For attaching to
speaker stands
Plate thickness
plus 7 mm to 10 mm
Screw
Press the cable into
the groove.
Cable
(not included)
5 mm, pitch 0.8 mm
60 mm
Speaker stand
(not included)
39