Disabling Wi-Fi From The Control Panel; Disconnecting Wi-Fi Direct (Simple Ap) Connection From The Control Panel; Restoring The Network Settings From The Control Panel - Epson XP-900 Series User Manual

User's Guide
Network Settings

Disabling Wi-Fi from the Control Panel

When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Select Settings on the home screen.
2. Select Network Settings.
3. Select Wi-Fi Setup.
4. Select Disable Wi-Fi.
5. Check the message, and then select Yes.
Disconnecting Wi-Fi Direct (Simple AP) connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1. Select Settings on the home screen.
2. Select Network Settings.
3. Select Wi-Fi Setup.
4. Select Wi-Fi Direct Setup.
5. Select Disable Wi-Fi Direct.
6. Check the message, and then select Yes.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Select Settings on the home screen.
2. Select Restore Default Settings > Network Settings.
3. Check the message, and then select Yes.
34