Advertisement
3.
Mainboard side Components Replacement
1. Open the two ejectors on the slot by pushing them, and remove the RAM
from the slot.
2. Align and insert the new RAM into the slot and push both ends of the
RAM down until the ejectors snap into place.
3. Disconnect: 1 SATA cable, 2. HDD power cable, 3. LED indicator cable
and 4. power switch cable from the main board.
4. Disconnect: 1. inverter cable,. 2. LCD panel cable and 3. VGA cable from
the mainboard.
4
3.
Chapter 3
Advertisement
