Notifier HS-NCM Installation Documentation page 12

6.5 Approved Cables and Distances for HS-NCM Applications
The following table shows approved wiring cables that can be used with the HS-NCM and the maximum total distance
allowed for each.
Wire Type / Gauge
Aerospace 7131KK / 16 AWG
Belden 5220UM / 16 AWG
Belden 5320UJ / 18 AWG
Belden 5320UM / 18 AWG
Comtran 8696 / 18 AWG
Comtran 8698 / 14 AWG
Comtran 8706 / 16 AWG
Comtran 8709 / 14 AWG
Comtran 35777 VitaLink 2C/16 / 16 AWG
Draka USA C FLPR-2C/16NS / 16 AWG
Genesis 4050 / 18 AWG
Genesis 4431 / 18 AWG
6.6 External Power for HS-NCM Applications
When using the HS-NCM with UL 8th edition panels, UL 9th edition panels where power
can not be applied via the NUP port or when configured as a repeater, a 24 VDC external
power source is required. Where applicable, the external 24 VDC external power source
must share the same ground reference as the NUP port.
12
Maximum Distance:
2000 ft. (609.6 m.)
1,000 ft. (304.8 m)
3,000 ft. (914.4 m)
3,000 ft. (914.4 m)
1,000 ft. (304.8 m)
1,000 ft. (304.8 m)
1,000 ft. (304.8 m)
1,000 ft. (304.8 m)
850 ft (259.0 m)
1,000 ft. (304.8 m)
3,000 ft. (914.4 m)
2,000 ft. (609.6 m)
Table 4 Maximum Distance for Approved Cables.
Wire Type / Guage
Genesis 4433 / 14 AWG
Genesis 4631 / 18 AWG
Genesis 4633 / 14 AWG
Genesis 5502 / 16 AWG
Lake Cable SNY141PR-NOT / 14 AWG
Pyrotenax 2/16-246T / 16 AWG
Radix CI14A0702-0000-I5000 / 14 AWG
Radix CI16A0102-0000-I5000 / 16 AWG
Shawflex 64220M140118700 / 14 AWG
West Penn AQ225 / 16 AWG
West Penn D980 / 18 AWG
West Penn D990 / 16 AWG
HS-NCM Installation Document — P/N 54014:B2 04/25/2014
Maximum Distance
3,000 ft. (914.4 m)
3,000 ft. (914.4 m)
3,000 ft. (914.4 m)
1,000 ft. (304.8 m)
1,200 ft (365.8 m)
425 ft (129.5 m)
1,500 ft (457.2 m)
1,600 ft (487.6 m)
250 ft (76.2 m)
1,000 ft (304.8 m)
2,000 ft (609.6 m)
2,000 ft (609.6 m)
– 24 VDC Out
+ 24 VDC Out
– 24 VDC In
+ 24 VDC In
TB1
HS-NCM