Energetics pr 4910p e-z Assembly Manual page 15

Error Code Problem
E0 Safety key not plugged-in.
E1 Console receives no speed signal.
E2 Current overload protection.
E4 Motor cable not connected well or
change in motor voltage.
E5 Communication interrupted.
E6 Power tube fault.
Solution
1. Insert the safety key correctly.
2. Replace the safety key or the safety key base. If it still
does not work, replace the console.
1. Check if the sensor plug is plugged-in.
2. Check if the magnetic sensor is broken or damaged,
replace the magnetic sensor.
1. Check if the fuse is inserted correctly.
2. Check if there is any damaged cable.
3. Check the tension of the running belt, adjust if
needed.
4. Check if the running deck is lubricated.
5. Check or replace the motor.
1. Check if the motor cable is plugged-in.
2. Check if the motor cable is broken, replace the cable
or motor if needed.
3. Replace the control board.
1. Check if there is any disconneted or damaged cable,
replace damaged cables if needed.
2. Replace the control board.
1. Replace the control board.
EN
FR
RU
SL
HR
BS
SR
15