InFocus INF6501a Hardware Manual page 6

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they
exit from the monitor.
• Unplug the monitor if you are not going to use it for an extensive period of time.
• Unplug the monitor if you need to clean it with the included microfiber cleaning cloth. The screen may be wiped with the clean-
ing cloth when the power is off. Never use alcohol, solvents or ammonia-based liquids on this monitor.
• Wash hands after handling the cables supplied with this monitor.
• The monitor remote control uses batteries. Make sure the batteries' polarity (+/-) is aligned correctly. Dispose of used batteries in
accordance with local disposal laws.
• Only use properly rated wall and stand mounting hardware that meet this product's specifications and follow the manufacturer
installation instructions. The warranty does not cover any damage caused by use of improperly rated mounting hardware or from
improper installation.
• Refer all service to qualified service personnel. Do not remove the cover or back. Servicing your own monitor can be dangerous
to you and will void the warranty.
• Only use replacement parts specified by InFocus. Unauthorized substitutions may result in fire, electrical shock or injury and may
void the warranty.
• When mounting the monitor to a wall, metric 8 (12mm) screws must be used. Use spring washers to prevent the screws from
coming loose. In addition, the mounting interface should comply with the UL1678 standard in North America. The mounting
means should be strong enough to bear the weight of the monitor (approximately 50.65 lbs / 23.0 kg without the stand).
• Follow these instructions to help ensure image quality over the life of the monitor. Failure to follow these instructions may affect
the warranty.
Page 4