Connect Ac Power; Pc Touchscreen Control Setup; Turn The Monitor On/Off - InFocus INF6501a Hardware Manual

Connect AC Power

1) Connect one end of the AC power cord to the AC In jack on the back of the monitor.
2) Connect the other end of the AC power cord to an AC outlet.
NOTES:
• Your monitor should only be operated from the power source indicated on the label.
• Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period of time.

PC Touchscreen Control Setup

1) Connect a computer to the monitor using a DVI, HDMI, or VGA cable.
2) Connect the Type A to Type B USB cable to the USB Type A jack on the computer and to the USB Type B jack on the back of the
monitor.
3) The computer can now be controlled by using touchscreen gestures on the JTouch monitor.

Turn the Monitor On/Off

1) Verify that the power cord is connected to a power outlet.
2) Press the Power button on the remote or the front of the monitor.
Page 8