Advertisement
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters
to fully dry before putting back into the vacuum machine).
• Clean the pre-motor filter every time the dirt container is emptied and replace the post-motor filter every 12 months.
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
Assembling your cylinder
Insert the end of the hose
into the unit. Ensure the
hose has clicked into place.
Fully unwind the power
cord. A yellow mark on
the cord indicates the
recommended cord length.
Do not exceed the cord
beyond the yellow mark.
Slot the metal telescopic extension
tube and hose handle together. All
accessories can be fitted to the end
of the metal telescopic extension tube.
Plug in and switch the
unit on by pressing the
power button.
Getting started
CAUTION
When unwinding the power
cord always pull out to
the yellow marker but
no further.
Advertisement
