Advertisement
Taking care of your machine
IMPORTANT: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Pre-motor filter needs to be cleaned every time you empty the dirt container. Do not use your vacuum cleaner
without all of the filters in place.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off.
Emptying and cleaning the dirt container
Remove dirt container
by pushing down the dirt
container release button and
lifting the dirt container.
Cleaning the pre-motor filter
Hold the dirt container and
twist the lid anti-clockwise.
Tap excess dirt from the filter. Rinse under a tap and leave to dry for 24 hours.
Hold the dirt container and press
the dirt release button located at
the rear of the dirt container.
Lift the lid to reveal the
pre-motor filter.
40˚C
40˚C
!
MAX
MAX
Hold dirt container over a
bin and press dirt release
button to open, allowing
dirt to fall out.
Lift out the pre-motor filter.
24hr
Advertisement
