Advertisement
Problem
There is an
accessory missing.
Why won't the carpet
washer turn on?
Why won't the solution/
clean water dispense?
Why won't the
brushes rotate?
CAUTION: To reduce the risk of personal injury, unplug the product before performing maintenance
/troubleshooting checks.
What to do if it goes wrong
Solution
• Check the 'This pack contains' panel on the box to make sure
the part is included with your machine.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with
a British 13amp fuse.
• The motor thermostat may have tripped. If this has happened, unplug
the vacuum cleaner. Remove and empty the dirt container and check
the hose for blockages. Clean the filters and allow the vacuum cleaner
to cool for approximately 1 hour (if you have washed the filters you will
need to wait 24 hours for the filters to fully dry before putting them back
into the vacuum cleaner).
• The dirt container may not be correctly fitted, remove the dirt container
from the vacuum cleaner and check it's assembled correctly, refit
ensuring it's locked into place.
• The filter may be clogged, clean the filter. Go to 'Taking care of
your machine'.
• The dirt container may be blocked, empty the dirt container. Go to
'Taking care of your machine'.
• There may be a blockage in the hose/tube. Disconnect from the
vacuum cleaner and carefully remove any blockages. Go to 'Let's
talk technical'.
• The filters may be clogged, clean the filter. Go to 'Taking care
of your machine'.
Advertisement
