Turning The Flash Off; Zooming In More Closely On Subjects (Digital Zoom) - Canon PowerShot S1OO Getting Started

Table of Contents

Advertisement

Turning the Flash Off

You can shoot with the flash turned off.
What if a flashing
When you press the shutter button halfway in low light conditions where camera
shake is likely, a flashing
tripod to prevent it from moving.
Zooming In More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to approximately 20x maximum, and
capture subjects that are too far away for the optical zoom to enlarge.
50
Press the r button.
Choose !.
Press the qr buttons or turn the 7 dial to
choose !, then press the m button.
If the flash is raised, it will automatically
lower.
Once set, ! will appear on the screen.
To turn the flash back on, follow the steps
above to choose
appears?
will appear on the screen. Attach the camera to a
Move the zoom lever toward i.
Hold the lever until zooming stops.
Zooming stops at the largest possible
zoom factor without image deterioration.
.

Advertisement

Table of Contents
loading

Table of Contents