Software Upgrade Instructions - Harman Kardon BDP 20/230 Service Manual

harman/kardon
Software upgrade
Preparation to upgrade software
1.Power on the set and press "settings" button on the remote.
2.Press left cursor to select "Information" .check the Software Version.
3. According the software version to check the correct software in UPG folder.
For example:if the software version is display "BDT20 XX.XX.XX",the correct
software is "BDT20_BD.bin",otherwise the software is "BDT2_BD.bin".
4.Start the CD Burning software and create a new CD project (Data Disc),copy
the UPG folder to the root directory of data disc.
5.Burn the data onto a blank CDR
Procedure for software upgrade:
A) Upgrade software via CDR:
1.Power on the set and insert the prepared Upgrade CDR.
2.The set will starts reading disc .
3.When the set recognize the disc,press Setting-->System-->System
Upgrade-->Disc, follow the instructions on the screen.
4.About 3 minute later,the set will automatically turn off when upgrading
completed.
B) Upgrade software via USB Flash Drive:
1.Decompress the packed file, copy the UPG folder to the root directory of a
USB memory device.
2.Insert the USB, the player will recognize the USB device automatically.
3.Press Setting-->System-->System Upgrade-->Disc, follow the instructions on
the screen.
4.About 3 minute later,the set will automatically turn off when upgrading
completed.
Read out the software versions to confirm upgrading
1.Power on the set and press "settings" button on the remote.
2.Press left cursor on remote control to select "Information" .The software
version and other informations will be displayed on the TV screen as follows:
Software Version: BDTX XX.XX.XX
Mac Address:XX-XX-XX-XX-XX-XX
Caution: The set must not be pow er off during upgrading, Otherwise the
Main board will be damaged entirely.
4-1
BDT 2 / BDT 20 Service Manual
Page 8 of 37