Harman Kardon BDP 20/230 Service Manual page 39

BDS + BDT Service guide. Harman/Kardon
Pairing loader and main board.
4.
Power on the BDS/BDT unit, and run software tool "Rpower.exe"
5.
Scan the board SN (not a 2D
bar code) or write it manually
into the "Loader" text field.
6.
Scan the 2D barcode on the
Loader into the "Bar Code"
text field.
Example of a 2D code read-out:
"00EK7QFF080000060800000000000
00000002A2C1F-04.1+00.7+00.91E67"
7.
Press "Write(F2)" button to start the initialization.
8.
If "Pass" turns green the update was successful
If "NG" turns red the update has failed.
Make sure both scans were correct and that the BDx unit
is turned ON. try again.
9.
Power off the set, unsolder XP7 if again if needed, and re-assemble the set.
10.
Power on the set: After a short startup time, where the new data is loaded, the front
panel will display: "disc 1"
11.
Press "Disc" button on the remote control, and then "Stop" button.
Front panel will display "no disc ".
Power off the set.
12. Restart the set. Initialization is complete. Make sure to test with CD, DVD and BD
discs.