Fader Screen - Yamaha MonitorMix User Manual

FADER screen

Adjusts send levels from each input channel to one's own monitor bus.
Channel fader
1
Adjusts send levels from each input channel. Channel fader can be
used regardless of where on the range of motion of the fader you have
dragged to. When dragging, move beyond the range of the channel
fader in use and drag up and down to make finer adjustments.
NOTE
Send levels cannot be changed when the monitor bus is set to FIXED.
Channel/bus information display
2
Displays the number, name, color and icon of each channel and
monitor bus. Press and hold this icon for a while to turn channels and
buses on and off. When off, icons will be grayed out.
Group icons will appear for group master channels created when
grouping channels. Tap this to show or hide grouped channels.
Grouping settings are configured on the PERSONAL GROUP & ORDER
screen (page
16).
Bus fader/Level meter
3
Adjusts output levels for the entire monitor bus under your control.
Channel fader can be used regardless of where on the range of motion
of the fader you have dragged to. When dragging, move beyond
the range of the bus fader and drag up and down to make finer
adjustments.
Two level meters are displayed when using a stereo bus (L/R), and one
level meter is displayed when using a monaural bus. Meter positions
are fixed at post ON (immediately after the mixer's ON button).
MonitorMix User Guide
1
2
Channel off
3
13