Advertisement
ABOUT THE PRO-9744 RECEIVER's PROGRAMMABLE FEATURES:
The PRO-9744 has six receiver slots available for programming to control various functions of the alarm system. The
programming of these receiver slots will be predicated on the transmitter membrane used and the functions desired.
The receiver slots available are as follows:
1
=
Lock and Arm (See Program Feature 11)
2
=
Unlock and Disarm
3
=
Channel 3 Output (Trunk Release)
PROGRAMMING THE TRANSMITTERS:
Action
With the valet switch in the off position
Turn the ignition switch to the on position
Flip the valet switch on, off, on, off, on, then off
Press and hold the lock button on the transmitter
until a long siren chirp is heard, repeat for each trans-
mitter
OR,
Flip the valet switch on then off.
Press and hold the unlock button on the transmitter
until a long siren chirp is heard, repeat for each trans-
mitter
OR,
Flip the valet switch on then off.
Press and hold the transmitter button with the trunk
symbol on it until a long siren chirp is heard, repeat
for each transmitter
OR,
Flip the valet switch on then off.
Press and hold the transmitter button with the head-
light symbol on it or, any unused button(s) you wish
to control activation of the headlights until a long si-
ren chirp is heard, repeat for each transmitter
OR,
Flip the valet switch on then off.
Press and hold the Red transmitter panic button with
the circles on it or any unused button(s) you wish to
dedicate for the panic feature until a long siren chirp
is heard, repeat for each transmitter. Note: The
factory default transmitter button for the panic fea-
ture will be controlled from the arm button unless
otherwise programmed,
OR,
Flip the valet switch on then off.
Press and hold the transmitter button with the (start)
key symbol on it or any unused button(s) you wish to
control activation of the Green w/ Black trace wire's
output until a long siren chirp is heard, repeat for
each transmitter. Note: This channel requires a
double push within 5 seconds to activate the output.
OR,
Flip the valet switch on then off to exit the program
mode, or turn the ignition switch off to exit the pro-
gram mode
4
=
5
=
6
=
System Response
Siren 1 chirp, LED 1 flash...
Siren 2 chirps, LED 2 flashes...
Siren 3 chirps, LED 3 flashes...
Siren 4 chirps, LED 4 flashes...
Siren 5 chirps, LED 5 flashes...
Siren 6 chirps, LED 6 flashes...
Siren one long and one short
chirp.
9
Headlight Operation
Dedicated Panic Button
Channel 4 Output (Remote Start)
Receiver Channel # & Function
Channel 1 = Lock & Arm
Channel 2 = Unlock & Disarm
Channel 3 = module's output Dark
Blue wire (Trunk Release) can be
programmed for 1 second pulse or
output as long as TX. button is
pressed.
Channel 4 = R.F. Headlight activa-
tion from dedicated transmitter but-
ton.
Channel 5 = Dedicated transmitter
panic button. (See module program-
mable feature #9)
Channel 6 = module's output Green
w/Black trace wire (Remote Start) re-
quires double push of programmed
transmitter button
Exit Program mode
Advertisement
