Fl Display - Denon DN-A7100 User Manual

FL DISPLAY

s d
a f
DISP AUTO TUNED
SLEEP AUTO SURR DIRECT
¡6
a
DISP (Display Off) indicator
This indicator is illuminated when the DN-A7100 is in
the display off condition.
s
SLEEP timer indicator
This indicator is illuminated when the sleep timer
function in the main-room is in use.
d
AUTO SURR (Auto Surround
mode) indicator
This indicator is illuminated to show that the AUTO
SURROUND mode is in use.
f
TUNER's indicators
AUTO : This indicator illuminates when the
tuner's Auto mode is in use.
TUNED : This indicator illuminates when the
tuner receives a suffi ciently strong
radio signal.
ST(Stereo) : This indicator illuminates when an
FM station is being tuned into stereo
condition.
g
DTS-ES mode indicators
(DISC6.1, MTX6.1)
These indicators will illuminate to show the DTS-ES
decoding mode (Discrete 6.1 or Matrix 6.1).
g j k ¡0 ¡2
h l ¡1 ¡3
SURROUND
ST V – OFF NIGHT PEAK ATT ANALOG
DIGITAL
DIGITAL
DISC 6.1 MTX 6.1 EQ
L
PCM
SL
¡5 ¡7
h
V (video)-OFF mode indicator
This indicator is illuminated when the Video-OFF
function is active.
j
NIGHT mode indicator
This indicator is illuminated when the DN-A7100 is in
the Night mode, which reduces the dynamic range of
digital program material at low volume levels.
k
PEAK indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than the capable level of internal processing,
this will illuminate. If this happens, you should press
the ATT button on the remote.
l
EQ mode indicator
This indicator is illuminated when the HT-EQ function
is active.
¡0
ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
¡1
DIGITAL Input Indicator
This indicator lights when a digital input has been
selected.
¡2
ANALOG input indicator
This indicator is illuminated when an analog input
source has been selected.
C R
¡3
SIGNAL FORMAT indicators
LFE
S SR
2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some
¡4
of these indicators will be illuminated to display the
specifi c type of signal in use.
¡4
ENCODED CHANNEL STATUS
indicators
These indicators display the channels that are
encoded with a digital
input signal. If the selected digital input signal is
Dolby Digital 5.1ch or DTS 5.1ch, "L", "C", "R", "SL",
"SR" and "LFE" will be illuminated.If the digital input
signal is 2 channel PCM-audio, "L" and "R" will be
displayed.
If Dolby Digital 5.1ch signal with Surround EX fl ag or
DTS-ES signal comes in, "L", "C", "R", "SL", "S" , "SR"
and "LFE" will be illuminated.
¡5
Main Information Display
This display shows messages relating to the status,
input source, surround mode, tuner, volume level or
other aspects of unit's operation.
¡6
DIRECT (Puredirect) indicator
This indicator is illuminated when the DN-A7100 is in
the SOURCE DIRECT or PURE DIRECT mode.
¡7
HDCD indicator
When HDCD signal is decoded from digital input, this
indicator will light up.
5