Table of Contents
Advertisement
Loading a cartridge
1.
Insert the cartridge into the slot in the front of the drive with the arrow uppermost and facing
the drive door(2).
Figure 27 Inserting a cartridge
1. Label area
3. Ready light
2.
Apply gentle pressure until the drive takes the cartridge and loads it. (See figure above.)
3.
The Ready light (3) flashes green while the drive performs its load sequence. When the
cartridge is loaded, the Ready light shows steady green.
Unloading a cartridge
CAUTION:
Never try to remove a cartridge before it is fully ejected.
2. Arrow indicates leading direction
Loading a cartridge
31
Advertisement
Table of Contents
Troubleshooting
