Siemens Sinamics S120 Operating Manual page 18

Frequency converters

Hide thumbs Also See for Sinamics S120:

Operation (software)

3.1 Handling instruction for execution of scripts

3. Select the desired input/output component (TM31) by entering the corresponding number.

4. Confirm your selection with "OK".

5. Confirm your selection with "OK", when you have selected the correct drive object (DO)

and/or input/output component (TM31).

6. If the report window appears showing "Programming successful", parameter assignment

has been completed successfully. Confirm with "OK".

Note

If the script has not been executed after approx. 3 min, cancel and restart the process again.

Option L34 parameterizing the circuit breaker on the output side

Operating Instructions, 04/2014, A5E02914106A

Table of Contents