Brother 97OOPC User Manual page 40

ENGLISH
Note
It is possible to scan multiple settings.
If no settings have been specified, a label
will be printed with the default P-touch
Template Setting (Single copy with "Auto
cut on" and "Half cut on"). For details on
P-touch Template Settings, download "P-
touch Template manual" (English only)
from the following web site.
http://solutions.brother.com/
Choose your region (eg. Asia/Oceania),
your country, your model and
Downloads for your model.
To specify the number of copies to be
printed, scan the "Number of copies" bar
code, and then scan the bar codes under
"For entering numbers" to specify a three-
digit number. The setting is automatically
applied when three digits have been
specified.
Example:
Specify numbers by scanning bar codes
as follows: 7→[00][7], 15→[0][1][5]
To change the setting for the number of
copies, scan the "Number of copies" bar
code again, and then scan the bar codes
for the new three-digit number.
6 Scan the "Select template" bar code, and
then scan the bar codes under "For
entering numbers" to specify the "Key
Assign" number (three digits) for the bar
code template.
Note
The setting is automatically applied when
three digits have been specified.
Example:
Specify numbers by scanning bar codes
as follows: 7→[00][7], 15→[0][1][5]
To change the number, scan the "Select
template" bar code again, and then scan
the bar codes for the new three-digit
number.
Scan the key bar code whose data is to be
7
used in the database file.
8 Scan the "Delimiter" bar code.
Scan the "Begin printing" bar code.
9
0 The object data in the specified template
is replaced with the database data, and
the labels are printed.
ABC Company
Planning
Walter Freeman
8766
39