Brother 97OOPC User Manual page 26

ENGLISH
After the installation is completed and
3
the screen shown below is displayed,
click [Close].
The installation of the printer driver is
completed.
Next, install the P-touch Editor 5.0.
Double-click "P-touch Editor 5.0
4
Installer.mpkg".
The P-touch Editor 5.0 Installer starts up.
Follow the on-screen instructions.
5 When the installation is completed and
the message "Click Restart to finish
installing the software" is displayed, click
[Restart].
®
The Macintosh is restarted.
The installation of software is completed.
After restarting the computer, connect
6
your printer to the computer by using the
USB/LAN cable, and then turn on the
printer.
AC adapter socket
AC adapter
Note
If you are connecting the printer to the
®
Macintosh via a USB hub, it may not be
detected correctly. If so, connect the
printer directly to the USB port on the
®
Macintosh .
®
7 For Mac OS X 10.3.9 - 10.4.x
Double-click the drive where Mac OS
is installed, and click "Applications" -
"Utilities" - "Printer Setup Utility".
®
For Mac OS X 10.5.x - 10.6
Click Apple menu - "System Preferences",
and click "Print & Fax". Then click
add your printer.
USB port
USB cable
LAN port
®
X
to
25