Brother 97OOPC User Manual page 38

ENGLISH
Bar code printing
A bar code scanned with the bar code reader
can be printed with the protocol and size
from a previously created template.
Note
For details on the various settings that can
be chosen by scanning the appropriate
bar code, refer to "List of bar codes for
specifying settings" (→ P.49).
If the bar code to be scanned with the bar
code reader has a different protocol than
the bar code in the previously created
template, it may not be possible to create
and print the bar code.
1 Transfer the template to be printed from
the P-touch Editor 5.0 to the printer by
using the Transfer Manager. (See
Software User´s Guide.)
(CODE128/9-digit/69 mm×17 mm)
Note
Be sure to create bar code templates that
comply with the limits on the size and
number of digits for the bar code to be
scanned. The new bar code cannot be
created if it exceeds the number of digits
specified in the template.
2 When data is transferred to
"Configurations" in Transfer Manager,
the "Key Assign" number is automatically
specified.
Scan the "P-touch template command"
3
bar code to begin specifying the print
settings.
Refer to "List of bar codes for specifying
settings" (→ P.49).
Specify the print settings by scanning the
4
bar codes with the desired settings, from
the "Basic Settings" bar codes.
Note
It is possible to scan multiple settings.
If no settings have been specified, a label
will be printed with the default P-touch
Template Setting (Single copy with "Auto
cut on" and "Half cut on"). For details on
P-touch Template Settings, download "P-
touch Template manual" (English only)
from the following web site.
http://solutions.brother.com/
Choose your region (eg. Asia/Oceania),
your country, your model and
Downloads for your model.
To specify the number of copies to be
printed, scan the "Number of copies" bar
code, and then scan the bar codes under
"For entering numbers" to specify a three-
digit number. The setting is automatically
applied when three digits have been
specified.
Example:
Specify numbers by scanning bar codes
as follows: 7→[00][7], 15→[0][1][5]
To change the setting for the number of
copies, scan the "Number of copies" bar
code again, and then scan the bar codes
for the new three-digit number.
5 Scan the "Select template" bar code, and
then scan the bar codes under "For
entering numbers" to specify the "Key
Assign" number (three digits) for the bar
code template.
Note
The setting is automatically applied when
three digits have been specified.
Example:
Specify numbers by scanning bar codes
as follows: 7→[00][7], 15→[0][1][5]
To change the number, scan the "Select
template" bar code again, and then scan
the bar codes for the new three-digit
number.
37