Date & Time - HP Photosmart R507 User Manual

Date & Time
This setting allows you to set the date/time format, as well as
the current date and time for the camera. This is usually done
when you first set up the camera; however, you may need to
re-set the date and time when you are travelling to different
time zones, or if the date and time is incorrect.
NOTE
date information in Playback. Also, this format chosen in
this setting is what is used in the date & time imprint
feature (see
1
In the
2
In the
adjust the value of the highlighted
selection by using the
buttons.
3
Press the
the other selections.
4
Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5
Press
Menu.
The new setting remains in effect until it is changed again, even
when you turn the camera off.
Downloaded From camera-usermanual.com HP Manuals
Chapter 6: Using the Setup Menu
The date/time format chosen will be used to display the
Date & Time Imprint
Setup Menu
Date & Time
buttons to move to
Menu/OK to save the setting and return to the
(page 103), select
sub-menu,
on page 67).
Date & Time.
Setup
105