Iso Speed - HP Photosmart R507 User Manual

To change the
1
Point the camera at a white or gray target (such as a piece
of paper), making sure that the entire screen encompasses
the white or gray target.
2
Press the
The camera then calculates a custom
based on the region inside the focus brackets. During the
calculation,
the calculation is complete, the color tint in
changes to match the new
and
3
If needed, repeat steps 1 and 2 until you get the desired
Manual White Balance
4
When you are satisfied with the
made, press the
Balance

ISO Speed

NOTE
This setting adjusts the sensitivity of the camera to light. When
ISO Speed
the best ISO speed for the scene.
Lower ISO speeds will capture the best quality images with the
least amount of grain (or noise), but result in slower shutter
speeds. If taking a picture in low light conditions without a
flash at
higher ISO numbers allow faster shutter speeds, and can be
used when taking pictures in dark areas without a flash, or
pictures of fast moving objects. Higher ISO speeds produce
pictures with more grain (or noise) and, thus, can be of
lower quality.
Downloaded From camera-usermanual.com HP Manuals
Chapter 2: Taking Pictures and Recording Video Clips
Manual White Balance
Shutter button (the camera will not take a picture).
PROCESSING...
WHITE BALANCE SET
Menu/OK
screen and return to the
This setting does not apply when recording video clips.
is set to the default
ISO 100, you may want to use a tripod. In contrast,
setting:
White Balance
is displayed on the screen. When
Manual White Balance
is displayed.
setting.
Manual
button to exit the
Capture
Auto setting, the camera selects
setting
Live View
setting,
setting you have
Manual White
Menu.
59