Seismic Transmitter; Dual Tilt Sensor; Battery Charger, Battery (Power Supply Unit (Psu)) And Transformer - CellSecure E12 CLEO User Manual

2.2.5. Seismic Transmitter High Power.
The seismic transmitter can be used to protect safes, vaults and movable assets. It will
send a signal to the E12 every time it detects any vibration or movement. Every
transmitter has a location and Identity, enabling the E12 to recognize where tampering
is taking place and communicate this information to the user.
Figure 7.

Seismic Transmitter.

2.2.6. Dual Tilt Sensor High Power.
The Dual tilt sensor will detect when a piece of equipment is tilted, ideal for computers.
When the alarm is in away mode and the sensor is tilted a little bit, only an SMS will be
sent. Tilting it more will result in an alarm condition. In any other mode only an SMS will
be sent. This sensor is ideal for use on hi-fi or computer equipment.
Figure 8.

Dual Tilt Sensor.

2.3. Battery Charger, Battery (Power supply unit (PSU)) and
transformer
The E12 Cleo uses a 3 amp PSU along with a 7Amp battery to supply power to the unit
when mains power fails.
This battery will enable the E12 to operate without mains power for approximately 3 to 7
days depending on the amount of Wired Sensors. The charger will charge the battery
16